Semperfli Fluoro Brite Sulphur

Fluoro Brite Sulphur

No tyer can be without a range of fluoro threads in their tying kit and Fluoro Brite Sulphur is a great choice. Fluoro Brite Sulphur is a twisted fluorescent thread. To get it to lay perfectly flat simply untwist with your bobbin holder and then Fluoro Brite Sulphur can be used as a flat floss. Fluoro Brite Sulphur has the most vibrant uv which the fish will find irresistible. Fluoro Brite Sulphur has been specially formulated for fluorescence and comes in 240 denier (3/0). Fluoro Brite Sulphur is recommended for hooks 10 to 2/0 but if you want to use it for smaller flies, Fluoro Brite Sulphur will split down further for you. Use it as a hotspot, for ribbing, a body or even a fab hot spot tail!. For tails we fold Fluoro Brite Sulphur four times in a loop and tie it in the tail of a fly, cut to length then tease the fibres apart with a dubbing brush and you get an astounding crinkled tail with what looks like little firelights on the tail of your fly.

Since Joseph Keen's book - Fluorescent Flies (1964) and Thomas Clegg's book – The Truth About Fluorescents (1967) fly tyers have been working with fluorescent materials. We decided to make a fluorescent thread with advantages that it could be used as a tying thread or as a floss, could be untwisted with the bobbin and used as a floss. Fluoro Brite was born to be different. What is well known is that fluorescent materials do attract trout, salmon and other species. We cannot see material effects except under a UV torch where we see the glow. But with their visual rods and cones capable of seeing into the UV spectrum many fish species see this like a light in the dark. Fluorescent materials work well one hour before daylight and one hour after nightfall. This is because even though we cannot see them, UV rays from the sun still hit the water and ignite your flies.

There are 25m / 27.3 yards (approx ) per spool of Fluoro Brite Sulphur

Semperfli Fluoro Brite Sulphur was last modified on 10/02/2022 17:16

Product Notes

Fluoro Brite Sulphur

No tyer can be without a range of fluoro threads in their tying kit and Fluoro Brite Sulphur is a great choice. Fluoro Brite Sulphur is a twisted fluorescent thread. To get it to lay perfectly flat simply untwist with your bobbin holder and then Fluoro Brite Sulphur can be used as a flat floss. Fluoro Brite Sulphur has the most vibrant uv which the fish will find irresistible. Fluoro Brite Sulphur has been specially formulated for fluorescence and comes in 240 denier (3/0). Fluoro Brite Sulphur is recommended for hooks 10 to 2/0 but if you want to use it for smaller flies, Fluoro Brite Sulphur will split down further for you. Use it as a hotspot, for ribbing, a body or even a fab hot spot tail!. For tails we fold Fluoro Brite Sulphur four times in a loop and tie it in the tail of a fly, cut to length then tease the fibres apart with a dubbing brush and you get an astounding crinkled tail with what looks like little firelights on the tail of your fly.

Since Joseph Keen's book - Fluorescent Flies (1964) and Thomas Clegg's book – The Truth About Fluorescents (1967) fly tyers have been working with fluorescent materials. We decided to make a fluorescent thread with advantages that it could be used as a tying thread or as a floss, could be untwisted with the bobbin and used as a floss. Fluoro Brite was born to be different. What is well known is that fluorescent materials do attract trout, salmon and other species. We cannot see material effects except under a UV torch where we see the glow. But with their visual rods and cones capable of seeing into the UV spectrum many fish species see this like a light in the dark. Fluorescent materials work well one hour before daylight and one hour after nightfall. This is because even though we cannot see them, UV rays from the sun still hit the water and ignite your flies.

There are 25m / 27.3 yards (approx ) per spool of Fluoro Brite Sulphur

Customer Reviews