3D Glass Epoxy Buzzer Claret
3D Glass Epoxy Buzzer Claret
is designed to imitate buzzers or chironomids as they emerge through the water to hatch into midges. With an epoxy coating the 3D Glass Epoxy Buzzer Claret are virtually bulletproof buzzers highly resistant from trouts teeth. With Midges hatch 365 days a year to flies like 3D Glass Epoxy Buzzer Claret are important to match the hatch!
Fly Fishing Methods, Tips & Techniques
The natural buzzers / chironomids move very slowly when emerging, moving slowly up and down in the water column until conditions are right to hatch and it is important that we use the 3D Glass Epoxy Buzzer Claret to imitate that movement. A team of flies often consists of 3 buzzers including one or more 3D Glass Epoxy Buzzer Claret for trout on a droppered leader, with the heaviest (or largest) buzzer on the point. Never strip a team of buzzers including 3D Glass Epoxy Buzzer Claret, allow the team of flies to drift naturally, suspend them with a buoyant fly like a stimulator or wulff or alternatively use a Thingamabobber. Always allow the team of flies including 3D Glass Epoxy Buzzer Claret to drop below the feeding zone. Lift the rod tip slowly taking about 30 to 60 seconds to reach 60 degrees then lower the rod tip rapidly, take up the slack line and allow to drop again. The lift and drop slowly imitates the movement of the natural buzzer / chironomid we are trying to imitate with our 3D Glass Epoxy Buzzer Claret.
When using buzzers the best fishing method is to keep it slow! What are the best 3D Glass Epoxy Buzzer Claret fishing techniques? firstly the biggest mistake made by fly fishermen is because they are used to stripping lures they try the same techniques with 3D Glass Epoxy Buzzer Claret. Buzzer fly fishing is a slow technique, use 3D Glass Epoxy Buzzer Claret on a drift with a floating flyline and allow the line to drift with the current or wind or use a Bobber or other strike indicator to suspend your 3D Glass Epoxy Buzzer Claret. Alternatively use a buoyant foam fly or stimulator flies to suspend a team of buzzers including 3D Glass Epoxy Buzzer Claret when buzzer fishing for trout
- Do NOT strip trout buzzers
- Static or slow drift team including 3D Glass Epoxy Buzzer Claret
- Vary depth of the team, trout will feed at different levels at different times of the day
- look for porpoising trout, if they are slowly taking buzzers just below the surface swap to CDC emerger buzzers or Sandys Assassins
- try strike indicators or suspend a team of buzzers including 3D Glass Epoxy Buzzer Claret with a Stimulator fly, Foam Arsed Blob or buoyant foam fly
- Be prepared to use small buzzers, although size 8 is a great point fly when boat fishing a size 16 or size 18 better matches natural trout buzzer sizes
We believe buzzers including 3D Glass Epoxy Buzzer Claret are certainly one of the important flies in any stillwater fly fishermans box when fishing for Rainbow Trout and Brown Trout.
If you are on a stillwater then check our hatch charts to see what is likely to be hatching. On reservoirs and lakes natural flies that will almost always be about and catch brown and rainbow trout are midges which grow and emerge. All stages of the life-cycle can be imitated by Bloodworms which change into buzzers which we have a successful ranges of Buzzer fly patterns including Blank Buster Buzzers and Flashback Buzzers and Epoxy Buzzers / Nymphs. Once in the surface film we can imitated these by Assassin Emergers, Blank Buster CDC Emergers and Emergers and Suspenders which to the trout look like the midge pupae ready to hatch.
Buzzer / Chironomid Hatches
| Month | Buzzer Availability |
|---|
| Jan | Some |
| Feb | Some |
| Mar | Plenty |
| Apr | Plenty |
| May | Lots |
| June | Lots |
| July | Lots |
| Aug | Lots |
| Sept | Plenty |
| Oct | Plenty |
| Nov | Plenty |
| Dec | Some |
The 3D Glass Epoxy Buzzer Claret imitates a buzzer in its nymph stage as it comes to emerge into an adult midge. This is a light buzzer without a beadhead so flutters more gently through the water. A midge starts life in muddy water as a bloodworm or chironomide which is blood red in color. When ready to emerge this wiggles to the surface and this is when we use a 3D Glass Epoxy Buzzer Claret to imitage this stage of the midge's life. Do not be afraid of using small 3D Glass Epoxy Buzzer Claret as a buzzer can be just a few millimetres long.
3D Glass Epoxy Buzzer Claret is shown as a pupa on the Midge Life Cycle drawing. The 3D Glass Epoxy Buzzer Claret is a very good imitation of a pupa. The pupa can be olive, red, brown, black or other colours according to the water and where the buzzer imitated by the 3D Glass Epoxy Buzzer Claret is in the water column. Buzzers start blood red when at the bottom of the water and change as they rise to the surface to emerge.
3D Glass Epoxy Buzzer Claret Fishing Techniques  The 3D Glass Epoxy Buzzer Claret will sink aslowly unless used with beadhead /goldhead or other heavier flies in a team. The 3D Glass Epoxy Buzzer Claret can be fished in a variety of ways and the 3D Glass Epoxy Buzzer Claret is a super fly when trout are feeding on buzzers which the 3D Glass Epoxy Buzzer Claret imitates. Buzzers emerge 365 days per year so using the 3D Glass Epoxy Buzzer Claret works all year imitating natural buzzers matching the hatch!.
|
| | |  3D Glass Epoxy Buzzer Claret Thingamabobber Drifting
The 3D Glass Epoxy Buzzer Claret can be used as part of a team of 3 or just two fishing flies and suspended then drifted under a bung or really well under a Thingamabobber. These can be 3D Glass Epoxy Buzzer Claret and other buzzers or 3D Glass Epoxy Buzzer Claret invarying sizes and colours. Using a team of fishing flies with 3D Glass Epoxy Buzzer Claret works well on both reservoirs and on rivers. On rivers using a Thingamabobber works well acting as an excellent bite indicator on turbulent or fast waters. Using the 3D Glass Epoxy Buzzer Claret in this way works well as a Thingamabobber moves with both the current and wind at a more natural speed to the water conditions.
|
| | 3D Glass Epoxy Buzzer Claret Fished Static The 3D Glass Epoxy Buzzer Claret can be fished static in 3 different ways, 3D Glass Epoxy Buzzer Claret team drifting, Bung 3D Glass Epoxy Buzzer Claret drifting and 3D Glass Epoxy Buzzer Claret dry fly drifting. |
| | |  Drifting 3D Glass Epoxy Buzzer Claret As Part of a Team Of Fishing Flies
The 3D Glass Epoxy Buzzer Claret can be used as part of a team of 2 of three fishing flies. Try 3D Glass Epoxy Buzzer Claret and other buzzers or alternatively use 3D Glass Epoxy Buzzer Claret in different sizes or colours for example use a size 12, 14 and 16 with the heaviest 3D Glass Epoxy Buzzer Claret as the point fly. The droppered leader can be used with a floating line and the 3D Glass Epoxy Buzzer Claret and other flies can be drifted with the wind and current moving the fly line and hence moving the 3D Glass Epoxy Buzzer Claret gently making in behave like the natural pupa the 3D Glass Epoxy Buzzer Claret imitates.
|
| | |  3D Glass Epoxy Buzzer Claret Dry Fly Drifting (New Zealand Style)
In New Zealand they developed a fishing style with a very heavy, larger fly and a 3D Glass Epoxy Buzzer Claret which is tied to a tippet attached to the bend or the eye of the large dry fly. This is deadly when used with a highly buoyant fly like Goddard Caddis, alternatively a heavy hackled klinkhammer or suspend the 3D Glass Epoxy Buzzer Claret using a foam fly. The 3D Glass Epoxy Buzzer Claret can be used as part of a team of fishing flies to hunt out those Brown Trout. On rivers using a 3D Glass Epoxy Buzzer Claret under a New Zealand rig is superb as both the 3D Glass Epoxy Buzzer Claret and the dry fly act as trout flies to attract trout and simultaneously present flies at surface and underwater catching trout at all stages of feeding. Using a Klinkhammer you are also presenting an emerging insect making the maximum of all opportunities.
|
There have been 2 reviews of the 3D Glass Epoxy Buzzer Claret. Check the 3D Glass Epoxy Buzzer Claret reviews and add your own comments
